One of the things I love most about the Quest two is the ability to use the power of a VR-ready PC to savor VR games and experiences via the Oculus link cable. If you’re trying to connect to a PC, merely your Oculus Quest ii link cablevision isn’t detected, this article should be able to help. In that location are a number of common problems, and most are hands fixed by following the instructions laid out below.
If your Quest 2 link cablevision is not detected, ensure that yous are using a USB 3.0 cable and port, brand sure the Oculus software is installed on your PC, your graphics drivers are upwards to date,
and enable the USB connection prompt if you don’t see this when connecting your Quest ii to your calculator.
Oculus Link Requirements For Quest 2
Before y’all connect your Quest 2 to a computer via a link cablevision, there are a number of things you need to exercise to set things upward correctly and ensure that everything is working.
- Make sure you lot are using a compatible USB 3.0 cable.
- Make sure that you are connecting to a USB three.0 port on your computer, and not an older USB 2.0 port.
- Make certain that you have the Oculus software installed correctly on your estimator.
Make certain that your figurer is uniform with Oculus Link.
In particular, there are a number of graphics cards that are non supported, although compatibility is improving over time.
Get-go Steps If Your Oculus Quest 2 Link Cablevision Is Not Detected
If y’all’ve made sure your hardware is suitable, and installed the Oculus software, just Oculus Link isn’t working when connecting your Quest two to your calculator, there are some simple steps you can have to ready a lot of issues.
Restart your PC and Quest 2.
Brand sure to fully switch off your Quest 2, and and so restart it, rather than just putting it into slumber fashion. Hold downward the ability button for x seconds to turn it off completely, and then press and concur information technology again to turn it on.
Unplug and replug the cablevision from your PC and the headset.
Effort plugging the USB-C connector in both ways round. This can sometimes resolve the event, even though USB-C connectors should be reversible.
How To Get The Quest 2 Link Cable To Work
If you lot’ve completed the steps to a higher place, you now need to cheque what happens when y’all plug the USB cable into your computer and headset.
You should get a pop-up USB connexion notification on your Quest ii headset that says
Allow Access To Data. You lot need to click
to enable your reckoner to connect to your Quest 2, and if you don’t see this notification, this is probably why your Oculus Link is not working. There is a mode to fix this that I will cover in the next department.
Do not click “don’t show again”, as this volition prevent your Quest 2 from connecting to your computer until you re-enable the USB connection prompt
If yous do run into the notification, yous volition become a second notification saying
Enable Oculus Link. Yous can either select
to launch this immediately, or
if you would like to launch Oculus Link later. With the USB cable attached to your headset, you can launch Oculus Link at any time via the quick settings bill of fare.
If you lot’ve followed this process, just aren’t able to connect your Quest ii using the link cable, there is a trouble that you need to solve. I’m going to cover all the common Oculus Link bug in the rest of this article to aid you lot get your Oculus link working properly.
No USB Connection Prompt Preventing Oculus Link Working
It is a common problem for the USB connexion prompt not to appear when connecting your Quest ii to a computer resulting in the Oculus Quest 2 Link Cable not being detected. The about common reason for this is that the USB connection dialogue has been turned off and it needs to exist turned on over again.
This happened to me, and many other people, and is normally acquired by clicking “Don’t Testify Again” instead of “Allow” when the USB connection prompt appeared. I assumed I would be able to turn the notification on again very hands, but this was not the case.
The solution to this problem is to enable developer mode on your Quest two, which will enable you to admission the Developer Settings menu to restore this dialogue box.
If your link cablevision was previously working, and now it is not, it is possible that you made the same mistake I did.
Follow these steps to make the USB connectedness prompt announced again:
- Plough your Quest two off completely
Sign up for a programmer account
Oculus developer website. This only takes a minute or two. You should merge your programmer account with the Facebook account that you apply on your Quest ii.
- Restart your Quest 2 and go to
Settings, and then
- Select the
option and you should now see a setting that says
USB connectedness dialogue settings
– enable USB connections via a confirmation dialogue. Click on the button side by side to this.
- Connect your Quest ii to your calculator via the link cable and the USB connexion dialogue box should at present announced. Select
Allow, and you should then go a second notification that says
Enable Oculus Link
– Access Rift apps while your Quest is plugged into your PC.
- You lot can enable/disable this from your Quick Settings at whatever time. Y’all can either select Enable to enter Oculus Link mode now, or Not Now, to dismiss the notification. Don’t click Don’t Evidence Again, unless you take enabled Developer Mode.
USB Cablevision Issues With Oculus Link
USB cable or USB port problems are very common causes of a Quest 2 link cable non working There are a number of bug with the USB connection that can forestall Oculus Link from working.
You don’t have to use the official link cable, but you do need to be careful to ensure that whatever cable you use is capable of providing power and transferring information at sufficient speeds.
This ways yous need a high-quality USB 3.0 cable for Oculus Link to work properly.
I don’t use the official link cable every bit I felt that information technology was overpriced, so I decided to buy a 3rd political party USB iii.0 cable. At that place are many compatible cables at present bachelor for Quest two. Meta recommends a cable that is at least 3m (10ft) long, but I would strongly recommend opting for a 5m (16ft) cable equally this volition give you considerably more freedom for room-scale VR.
Call back that you will need a cable with a USB-C connector at one finish to connect to your Quest 2. Whilst y’all can go an adapter to connect a USB-A connector to a USB-C port, this tin can touch on the function of the cable, so is all-time avoided.
It is a good idea to endeavour multiple USB iii.0 ports on your computer if y’all are having difficulties getting Oculus Link to work.
USB ports can be temperamental at times, and you may observe that one USB port works perfectly for Oculus Link, while other ports do not work at all.
If you want to check whether your USB cable and port are suitable for Oculus Link, you lot can run a USB speed exam via the Oculus software on your PC.
- Use a USB 3.0 cable to connect your Quest 2 to a USB 3.0 port on your calculator.
- Open the
on your PC and navigate to the
Quest 2 and Impact
and a card volition slide out from the right.
- Scroll to the lesser of this carte and select
- The test will simply take about x seconds and it will tell you whether the cable is uniform with Oculus Link and whether it is connected in USB iii mode, and what the information transfer bandwidth is.
Turn Off Air Link If You Desire To Use The Quest 2 Link cablevision
Y’all can also connect your Quest two to a computer via WiFi using a characteristic chosen Air Link. This is currently an experimental feature that must be enabled via the Experimental settings menu. You cannot employ the concrete link cable to connect to your computer if Air Link is enabled in the settings card.
Of note, you volition still get the USB connectedness notification when you connect your Quest two, and yous tin can transfer files to and from your figurer via a USB cable, but y’all volition but have the option to apply Air Link.
If you want to use Oculus Link via a physical cable, you lot demand to go to the Experimental settings menu and toggle Air Link off.
Once you take done this, you tin can connect your Quest 2 by USB cable to your computer and yous should receive a notification asking whether you want to Enable Oculus Link.
Oculus Drivers Can Forestall Oculus Link From Working
If nothing has worked and so far, and your Quest 2 still isn’t detected when you lot connect the link cable, I would recommend reinstalling the Oculus drivers on your figurer. Bear in mind that a driver effect can cause problems even if the Oculus software appears to work commonly on your PC.
You should notice the installation files for the Oculus drivers in the following file location. C:\Plan Files\Oculus\Support\oculus-drivers\oculus-driver.exe. The exact location will differ depending on whether y’all install the Oculus software in the default installation path.
You can also uninstall the Oculus software and reinstall information technology, to ensure that it is working correctly. You can
download the Oculus software hither.
Log Out Of The Oculus Software
Oculus Link will simply piece of work if you have a correctly installed version of the Oculus software and yous are logged into your Oculus account on your estimator. For some reason, logging out of the Oculus software and logging in once again can sometimes fix some Quest 2 link cable not detected problems.
Click on the settings tab in the Oculus software and then click Log Out. You lot can log in once again immediately so effort using the link cable on your Quest ii once again.
Turn Off Power Management For Your USB Ports
If your Oculus Link keeps disconnecting, the problem may be due to Windows power management settings for your USB ports. By default, Windows volition try to salve power by reducing power to USB ports that are not in use. This can sometimes effect in the USB port that you are using for the Quest 2 link cable to lose power.
I recommend you change the Windows power direction using the following steps.
- Open up Windows “Device Manager” and then click on “Universal Serial Passenger vehicle controllers” to aggrandize the list.
- Right-click “Generic USB Hub” (there may exist more than one) and and then select “Backdrop”.
- Click the “Power Management” tab, and then de-select “Permit the computer to turn off this device to salvage power”.
- Echo this for any other “Generic USB hub” listings.
- Unplug the USB cable from your computer and Quest 2 and then plug it in again.
Update Your Graphics Drivers
Out-of-date graphics drivers are actually quite a common cause of Oculus Quest 2 link cable not being detected, and tin can also result in Oculus Link loading forever, or getting stuck with a black screen when yous try to connect.
If everything seems to be fix correctly, but when y’all click to connect to Oculus Link and yous just encounter 3 dots on the screen indicating it is loading, or a blackness screen, that never changes, it is highly likely to be a graphics driver problem.
1 of the best means to update your graphics drivers, and to go on them upward-to-date is to use graphics update software for your brand of graphics card.
Download theAMD software for driver updates if you have an AMD graphics carte.
DownloadGeForce Experience if y’all have an NVidia graphics menu.
Once yous have the relevant software installed, y’all will be able to download and install any updated drivers. You can also enable the software to bank check for driver updates over time, and download and install them.
Manufacturing plant Reset Your Oculus Quest 2
If you’ve got this far, and nothing has worked, and you’re certain that your figurer, USB ports, and USB cable are compatible with Oculus Link, you lot should consider doing a factory reset of your Quest 2. Although the Quest ii is a quality VR headset, at that place are a number of software and hardware bugs that require a factory reset to resolve.
The good news is that all your purchases are saved to your Oculus/Meta account, so information technology’s pretty quick to pick up from where you left off later a factory reset.
You can practise a mill reset of your Meta/Oculus Quest 2 by post-obit these steps:
- With your Quest ii off, hold down the ability and volume buttons until y’all see a
USB Update Mode
card appear on the screen.
- Select theMill Reset
option by navigating with the book upwardly and down buttons, then click the power button to select it.
- Select “Yes, erase and factory reset” and press the power button to reset your Quest 2.
- In one case the factory reset is complete, you will have to perform the initial setup and download all of your games once more.