Airpods Flashing White But Not Connecting

by -73 views

Why do air pods blink dark-green? –
They blink light-green when they’re connected to a device and have a bombardment.

Almost every Apple user has experienced the problems with AirPods while using them. Many have complained about their Airpods being not able to connect or lite blinking green instead of white.

This article provides a couple solutions that have worked for many people to fix their problem with Bluetooth connection on their iPhones, Macbooks and even Apple TVs.

Model Number A1523, A1722 A2032, A2031 A2084, A2083
Release year 2017 2019 2019
Model Number A1602 A1938 A2190
Release year 2017 2019 2019
Earbud compatibility Gen one & Gen 2 Gen one & Gen 2 AirPods Pro only
Qi wireless charging No Yes Yes

Problem i

AirPods are blinking green subsequently pairing, but they are not connected to any device.

How to fix

If you are facing this effect then there can be two reasons for it: either your iPhone is non connecting to your Airpods subsequently turning Bluetooth ON or your AirPods need an update. So, try out both the methods below which might work for yous.

Solution ane

Check if your iPhone is connected to your AirPods or not. If yes, then movement to Solution 2 and if no, then try connecting them with an Android phone (if you take one) and come across how information technology works out for you.

If pairing succeeds on some other device (which means the issue lies within the Bluetooth functionality of your iPhone), contact Apple tree Support or take it to a service center where they will definitely ready this trouble.

Solution ii

Make certain that there’s no update pending in your settings app and you are all upward-to-date regarding the iOS version and security patches using Settings –> General –> Software Update.

You tin also make certain that there’s no update required for your AirPods by going to the same department and checking the version.

If there is an update available, then you tin install information technology by tapping on Download and Install . In case you don’t meet whatever updates in this card, become alee with these steps:

Solution 3

Go to Settings –> Bluetooth  and forget all devices that are listed under Paired Devices until your iPhone stops scanning these devices in the list of available Bluetooth devices.

Once done, pair them again one afterward another using Bluetooth settings. This has been a keen solution for many users who take had this trouble with their Airpods before.

Trouble ii

AirPods blinking greenish while listening to music or podcasts on your iPhone

How to fix

If your Airpods are blinking green then there tin be two reasons for it: either y’all need to disconnect and reconnect them once more to fix this outcome or they need an update. And then, try out both the solutions which might work for you.

Solution 1

You tin but disconnect and connect them over again by putting them in the case and opening information technology after a couple of seconds (without removing them from your ears).

This will make them disconnect from the Bluetooth device continued with information technology (in this case, your iPhone) and then institute a new connection with that particular device once once more.


Problem 3

AirPods are blinking green while trying to use Siri

How to Set

what you will have to practise if your Airpods are blinking dark-green when using Siri on your iPhone/iPad –

Solution 1

If you lot are using an iOS device then update the software by navigating to Settings -> Full general -> Software Update  and tapping on Download and Install  which is visible at the bottom under Update section. This has been a swell solution for many users who have had this problem in the past so at that place’due south no harm in updating your phone.

Solution 2

Switch off Hey Siri  feature which is available in iOS devices that supports iOS version 10 and above. This solution has been cited past many users in the by so you tin can effort it out if your Airpods are not responding to Siri at all even afterwards updating the iOS version on your device.

Solution 3

Reset Network Settings completely and then pair your iPhone with your AirPods once again. This method has also worked for a lot of people in the past which is why I am suggesting this solution although it’southward not that simple as other methods.

Follow these steps if you want to reset network settings – Become to Settings -> General -> Reset  -> Tap on ‘Reset Network Settings’  and enter passcode when prompted (if there’south one set), tap on ‘Erase All Content and Settings’ , enter passcode again when prompted.

Problem 4

AirPods are blinking greenish even after resetting network settings on iPhone

How to fix

Solution 1

Go to Settings -> Bluetooth  -> Scroll downwardly and tap on ‘i’ icon next to your AirPods ↯ icon .

Solution 2

Reset all the settings including Bluetooth, Wi-Fi etc by navigating to Settings –> General –> Reset  from bachelor list of options under this card.

 Solution 3

Unpair or Delete your Airpods from the device you are using it on (iPhone/iPad) and then Pair them with that device once over again. This tin sometimes solve connectivity issues equally well so requite information technology a endeavor before moving onto other solutions here.

Solution four

Get to Settings -> Bluetooth  -> Whorl down and tap on ‘i’ icon side by side to your AirPods ↯ icon .

  Solution 5:    Put the example near your iPhone and open up it. This will make them power up again which might fix the blinking green issue for you.

If none of these methods worked then try using your Airpods without their charging case by powering them up via connecting only one charge cable into an USB port/computer. Or any other device that tin can provide required current (via USB-C port) so you get rid of all the problems related to battery life.


Trouble 6

My AirPods are not detected past my iPhone/ iPad when I put them in my ears.

How to fix

If your AirPods are not getting detected by the device then in that location can exist multiple reasons for that. Let’due south commencement with some basic troubleshooting and attempt to see if we can set it.

Solution ane

Checking connectivity on both devices (iPhone and AirPods). Make certain you remain close plenty (within 5-6 anxiety) of your iPhone then they connect seamlessly every fourth dimension y’all put them in your ears.

Solution ii

Put them back into their charging instance and press downwards on the case until you hear a chinkle which indicates that they have been paired successfully with your iPhone. At present remove them from the example and use them every bit usual.

Solution 3

Reset Network Settings completely and then pair your iPhone with your AirPods again.

Solution 4

Try using them without the example by powering them up via connecting only one charge cablevision into an USB port/estimator or whatever other device that can provide required electric current (via USB-C port).

Problem 7

Airpods are non detected on MacBook/MacBook Pro

How to fix

If you’re trying to pair your Airpods with a Mac so first check if they accept been connected to any other device before. If so, just unpair them from that device and attempt pairing it with the Mac again.

This trouble should be fixed now as Apple has best-selling it and solved it in macOS Sierra ten.12.4 update . Yous can read more virtually this problem hither – Set for macOS Sierra x.12.4 Update Regarding AirPods Detection Upshot on Mac

Problem 8

My Airpods are not connecting to my iPhone/ iPad when I put them in my ears even though they have been connected before

In this example, the all-time way is to reset all the settings so you go a clean slate and can start from scratch with your Apple devices. You’ll have to go through steps we listed above under ‘ Fix 6 – My AirPods are not detected by my iPhone’ then follow these steps for resetting settings:

Navigate to Settings -> General -> Reset  and select “Reset All Settings” and enter the passcode if prompted (if at that place’southward i gear up), tap on ‘Erase All Content and Settings’ and again enter the passcode if in that location’south one (if you have fix).

This process volition delete all your app data, preferences, network settings etc that might be causing this problem. Once it is done, try connecting your AirPods to iPhone without their case or connect them via USB port on a computer/laptop as we mentioned above for Set up 6.

Problem 9

My AirPods don’t offset playing automatically after I put them in my ears.

How to fix

This can happen when you open up an app on your iPhone which is continued with Bluetooth devices like music player/radio apps then make sure you shut those apps completely before removing AirPods from your ears and await for 10 seconds and so they disconnect automatically and then try connecting them once again.

Problem 10

My AirPods are not pairing with my iPhone/iPad when I take them out of their case.

How to fix

Some users accept reported that they are facing this problem after removing Airpods from their charging case without pressing the button on the dorsum which turns off Bluetooth connectivity to prevent battery drain. Try following the below mentioned steps to ready information technology.

Solution 1

Printing and hold the round button on your Airpod’s charging case until you see a white light in betwixt earbuds blinking slowly. This indicates that bluetooth is turned off for AirPods .

Now, remove both Airpods from your instance and put them back into ears/accuse cablevision separately i by one while both devices (iPhone/iPad) are in pairing mode (Airpods case has to be powered ON).

Solution 2

Make sure you press the button on the dorsum of the charging instance after putting Airpods back into information technology. This volition turn off bluetooth connectivity and foreclose battery drain.

Now, remove both earbuds from your charging case again one by one and put them dorsum into ears/accuse cable separately depending on whether you’re connecting the left or correct side first.

Steps for connecting just one Airpod

If only i Airpod is connected then information technology’ll automatically connect with iPhone when taken out of ears or charged via cable plugged into USB/USB-C port on reckoner/laptop/car charger if powered ON.

While the other Airpod is in ears, press the round button on the dorsum of the charging case to turn off bluetooth connectivity and put it back into the charging case.

Now, take out just ane Airpod from your ear/charging example and put it dorsum again. This time just one Airpod will connect with the iPhone automatically as information technology’due south already connected to the iOS device before and then now y’all can employ this newly continued single AirPod without putting dorsum the other one.

Problem 11

After upgrading iOS to High Sierra 10.thirteen my Airpods are not detected past my iPhone.

How to gear up

Apple has released a prepare for this issue here – Fix Relating to Some Customers Unable to Hear Sound or Distorted Audio While Using Their AirPods After Grading Their IOS Device To A Newer Version  in which they mention that a fix volition be available in the next software update for Airpods.

Problem 12

I am unable to connect both of my AirPods at the aforementioned time with iPhone seven/seven+.

How to fix

Some users have reported this problem after upgrading their iPhones from iOS 10 or below to iOS xi via OTA or iTunes.

If your iPhone is already on iOS 11 and so effort updating your AirPods and restarting both devices (iPhone and AirPods) again and it should starting time working fine.

If you haven’t updated your iPhone all the same, practise information technology now so y’all tin can get this new feature “Tap To Wake” which wakes up the Apple Picket display past tapping on it instead of rotating the crown.

Problem 13

My AirPods are not recognized by whatever device/Bluetooth speaker/Car Bluetooth radio etc.

How to fix

You should effort connecting your Airpods to another iOS or Mac device running the latest software versions if possible. If they work fine on other devices then it’south a hardware issue which you can get fixed nether warranty from Apple tree Support .

If they don’t piece of work on any device then y’all may have a faulty pair and need to contact Apple support for replacement/repair. You tin can likewise reset them using below mentioned steps if nothing helps.

Steps for resetting your AirPods

Connect your charging example with a power supply and so that its LED lights up in between earbuds present within the case. Now, remove both earbuds from the case and press & concord the ‘connect’ button on the back of the instance for at least xv seconds.

Now, put both earbuds back into the charging case so that the LED blinks orange instead of white. This will reset your AirPods . Now, endeavour connecting them to another device to run across if they piece of work fine.

Problem fourteen

Apple tree Airpods not working with a specific Bluetooth speaker/audio device.

How to set

If yous’re experiencing issues while connecting Airpods to a Bluetooth audio device then open up Settings app again and become to the Bluetooth section.

Toggle bluetooth ON/OFF here and wait until information technology’south turned off automatically OR restart your iPhone before turning AirPods bluetooth ON again inside Settings > Bluetooth carte du jour. If this method doesn’t work for y’all then try resetting your Airpods to solve this consequence completely.

Steps for resetting earphones

Connect your charging instance with the power supply and so that its LED blinks White. Now, remove both AirPods from the case and press & concord the ‘connect’ button on the back of the case for at least 15 seconds until the LED light becomes orange instead of white.

At present put both AirPods back into the case and they should exist reset now. Now, endeavour connecting them to another device/audio Bluetooth speaker to meet if it’due south working fine equally expected.

Apple Airpods are awesome, there is no doubt about that. They look somewhat magnificently futuristic and the convenience of having wireless headphones makes them actually great to take.

Only even though Apple’s offering has been steadily improving since its release, some people are still experiencing problems with their devices. Some of these are pretty random, just one problem seems to be consequent beyond all sources:

Airpods blinking green ways Bluetooth connection is not connected or cannot connect

Causes for Airpods blinking green

As we mentioned before, there can be a bunch of causes for your Airpods flashing the green lite instead of the white one. The most common ones include:

Unresponsive touch controls (if you gloves, for example) Poor Bluetooth connection (move closer to your device) Battery life is depression Airpods are non yet paired with the device Low point on Bluetooth connection

Fixes for Airpods blinking green

Here are some simple steps you can take to try and prepare this problem. They might not be 100% constructive, only they will definitely help you in most cases.

Reboot your device or restart Airpods Switch Bluetooth view / aeroplane mode off and on Turn Siri On/Off Toggle W1 Fleck Reset your iPad / iPhone Delete Apple tree Watch Pairing from all devices Check Apple tree Watch software update Verify the manufacturing engagement on both Airpod pieces If all of these fail to work – send it back for repair.


I’m not sure why this is the instance, simply it appears that Apple needs time for their W1 fleck to handle device handshaking/pairing before they are fully functional.

They probably take some sort of bluetooth connection to your iPhone the whole time during the bootup process, then finally disconnect once everything is set up properly.

Simply keep that in mind if yous are having trouble setting them upwardly.