Apple Watch Handwashing Timer Not Working

How To Set up Handwashing Not Working On Apple Lookout man (watchOS 7)

How to fix Handwashing in watchOS 7

Handwashing is one of the most spectacular new features available in watchOS 7. The Apple tree Picket automatically detects when you’re washing your hands and starts a 20-second timer to brand sure that y’all sanitize properly. Even so, many readers have reported that handwashing is not working. The device fails to detect the gesture and no timer or haptic feedback is available.

Before you utilise the troubleshooting tips provided in this article, please make sure that your Apple tree Watch is updated to watchOS 7 and that information technology’s uniform with the new handwashing feature. Unfortunately, not all watch models that support the 7th watchOS generation can also include the handwashing option.

Handwashing Not Working On Apple Picket Serial 3

The AW iii tin can exist updated to watchOS 7, only it doesn’t become handwashing considering of defective hardware features. This model isn’t equipped with ambient audio detection technology, thus not existence able to notice when water is running. The accelerometer and gyroscope sensors on the Apple tree Sentry three are bones and can’t provide the Autumn Detection characteristic, which means that the device will have a difficult fourth dimension tracking the handwashing motion likewise. All these have forced Apple to exclude the feature from this model.
Same hardware limitations lead to the Apple Watch 3 missing out on the Noise app likewise.

How To Gear up Handwashing Detection Non Working

If ain the Apple tree Watch 4 or later, accept updated to watchOS 7 and handwashing isn’t working here is what to practice:

1. Enable Handwashing Feature

The feature isn’t enabled by default. You have to turn it on offset:
how to enable handwashing in watchOS 7

  • i.
    Click the
    Digital Crown
    and open
    in watchOS 7.
  • 2. Curl for
  • 3. Enable the
    Timer, past pressing the toggle bachelor next to it.
  • 4. Keep
    turned ON too.

two. Is Mensurate Sounds Enabled?

Handwashing uses the Apple Watch’s microphone to detect sounds of h2o running. If this setting is turned off, the feature won’t work as expected.
enable measure sounds apple watch feature

  • one. Open the
  • ii. Utilize the
    Digital Crown, to scroll for
  • 3. Tap on
  • 4. Cheque if the
    Measure Sounds
    selection is enabled!

three. Reboot Apple tree Watch

If all settings are OK just Handwashing isn’t working forcefulness restart your Apple Scout and run across if this helps:
How To:
Simultaneously printing and hold the
Digital Crown
and the
Side Push
for at least
x seconds. Release the hold when the Apple logo is displayed on the watch’s screen. Exist patient until the device reboots and test the handwashing feature!

four. Remove Protective Instance

Are you protecting your Apple tree Watch with a case or any other accompaniment? Information technology could obstruct the microphone and forestall handwashing from working every bit expected. Remove the case and endeavour the feature once again. Any change?

five. Restore Apple tree Watch

If yous reached this step and handwashing detection is still not available your final pick is to unpair your Apple tree Lookout from the companion iPhone and repair (restore) it, using the near recent backup. The iPhone automatically creates a backup of your Apple Spotter before unpairing. The detailed step-by-pace tutorial for this process is available here.

Prepare Apple Lookout man Handwashing Reminders

watchOS 7 is also able to send Handwashing reminders to help you maintain your hands clean. If handwashing notifications aren’t triggered when you arrive home, hither is what you have list your
Domicile Accost
in your Contact Card:
apple watch handwashing reminder

  • 1.
    Open the
    app, on your iPhone.
  • 2.
    Tap the
    tab, in the bottom app scrubber.
  • three.
    Tap on the
    My Carte
    characterization, available at the top of the screen.
  • 4.
    Open the
    options, from the acme-right corner.
  • 5.
    Tap on
    ‘add address’.
  • vi.
    Make full in the details and tap
    when set.

Additionally you have to check for
Pregnant Locations
to be turned ON:

  • 1.
    Open the
    app, on the companion iPhone.
  • 2.
    Scroll for
  • three.
    Tap on
    Location Services.
  • 4.
    System Services.
  • v.
    Scroll for
    Significant Locations
    and make sure that they’re enabled.

How To Check Handwashing History

After you fix handwashing on Apple Watch you tin utilize the companion iPhone to bank check how good you washed your easily:

  • i.
    Open up the
    app on your iOS 14 device.
  • ii.
    Tap the
  • iii.
    Coil for
    Other Data.
  • 4.
    Tap on
  • Tip:
    You can gyre and tap on
    Add together to Favorites
    if you lot desire to bring up the Handwashing data in the Health app Summary screen.

Did this commodity help you fix Handwashing on Apple tree Sentinel? Which tip worked? Permit u.s.a. know using the comments section bachelor below.

How to fix GPS information issues in watchOS 7!