How Much Thermal Paste On Gpu

Quick Navigation

  • one
    How to Set up Too Much Thermal Paste

    • 1.ane
      Remove the Heatsink
    • one.2
      Cleaning the Paste
    • 1.iii
      Scrapping off the Former Paste
    • 1.4
      Cleaning the Residue
  • 2
    Applying the New Thermal Paste

    • 2.i
      Footstep i: Drying
    • 2.2
      Stride 2: Applying
    • 2.iii
      Step three: Spreading
  • 3

Thermal paste is of import to make a perfect contact betwixt your CPU cooler and the processor. Information technology helps in filling the microscopic imperfections that could otherwise trap the air particles between the heatsink and your CPU, resulting in lower rut transfer. When it comes to applying the thermal paste, in that location’south a specific corporeality that you should consider. Just if you didn’t know this before and y’all accept applied too much thermal paste on your CPU, then it could do more harm than benefit. Simply there are some effective means to overcome this consequence.

Firstly, applying too much thermal paste on a CPU would crusade it to spill over the sides when you’ll rest the heatsink at the superlative. Furthermore, the excessive thermal paste could spill and damage the CPU socket.

Source: Reddit

Go on in mind that using thermal paste excessively could also shorten the life bridge of your hardware. When too much thermal paste is put on a component, it could upshot in a lack of connectivity between components or may leak from the side and result in a curt excursion.

Don’t worry, if you lot ended up throwing too much thermal paste on the CPU or GPU, and so we’ve some possible solutions to become out of information technology.

How to Fix Too Much Thermal Paste

The only way around fixing excessive thermal paste is to remove it and re-apply the new thermal paste.

Here’s what you need to exercise:

Remove the Heatsink

The first footstep is to uninstall the heatsink from the CPU. You’ll need to unscrew the heatsink then lift information technology off gently.

Cleaning the Paste

Equally nosotros’ve practical too thermal paste, at that place’south the but manner out of it, and that is to wipe off the existing thermal paste.

Now if you are using a good-quality thermal paste, then information technology wouldn’t be too dry to be removed. It would exist more in a solid-liquidise form and can be removed without too much effort.

Scrapping off the Old Paste

First of all, you lot’ll need to remove the chunks of paste using a plastic scraper. Don’t use whatever metal scrapper at this stage.

A plastic scrapper could easily remove the big chunks of the thermal paste within minutes. This is the safest method to remove the thermal paste from your components.

Cleaning the Residue

Once you are done removing the large chunks of the thermal paste from your hardware, it is time to make clean any residue left behind.

Accept a dry or micro-fibre cloth and dip it in rubbing booze or whatsoever thermal paste cleaning chemical compound like ArcticClean.

Now use the wet finish to moisten and remove the old thermal paste. After the leftover is wiped off, echo the process in one case again to make certain there’s no layer of thermal paste behind.

Applying the New Thermal Paste

Now equally you’ve cleaned the excessive thermal paste off from your component, it’s time to re-utilize the thermal paste in the right way.

You’ll detect a lot of methods on the internet on how to finer use the thermal paste on your CPU or GPU.

But hither we’ll only discuss the thermal paste application method we use in our lab.

Just to let y’all know we’ve seen people applying toothpaste instead of thermal paste, which is totally wrong. Don’t do that. Toothpaste dries upwardly quickly as compared the thermal paste. It’due south not as good as the thermal paste and may damage your hardware in the longer run.

Well, if your CPU comes with a thermal paste applied to it, so there’due south no need to reapply it again. But if your CPU doesn’t come with a thermal paste or you’ve practical also much thermal paste on it, and at present removed information technology, then follow the below method to reapply information technology safely over again.

Pace 1:

Subsequently you’ve completely removed the old thermal paste, information technology’s time to permit your components dry out for a moment. Don’t utilise the new paste immediately and let the hardware air-dry out at normal room temperature.

Call back that we need to dry out the cooling solution that we used to remove the residue. Booze or whatever other thermal paste removing solutions are non-conductive, and then you shouldn’t worry about the brusk circuits or other amercement to your components.

Step 2: Applying

It’s time to apply the new paste to your hardware. Let’due south say nosotros want to apply the thermal paste on our CPU, then we’ll get-go with the famous “Dot Method”.

how much thermal paste should be applied in dot method
dot method thermal paste application

In this method, you have to apply a small-scale portion of paste ( size equivalent to a pea or gain) at the centre of your processor. If y’all are building a PC for the outset fourth dimension, then it’s the easiest method to install thermal paste on your CPU.

Stride 3: Spreading

Well, information technology’s meliorate to leave the paste as information technology is and mount the heatsink on top of information technology to spread the thermal paste evenly. Y’all’ll observe people spreading the thermal paste all over the CPU to make it more effective, which doesn’t brand any sense. After all, the merely paste that would exist in contact with the heatsink is the heart part of your CPU.

Therefore, applying thermal paste at the centre of your processor and mounting the CPU cooler on meridian it volition evenly distribute the thermal paste. So, there’s no need to spread the thermal paste with fingers or past applying pressure level on the CPU.

Here’due south a detailed video that shows how to install thermal paste on a CPU in unlike ways


Finally, at that place’s no need to worry if yous have practical likewise much thermal paste on your CPU or GPU. All you need is to remove it with the aid of booze or any other thermal compound removing solution. Later, let it air-dry and so re-apply the new thermal paste using the dot method.