How To Get Haste 3 Beacon

Buoy Structure (3 layer pyramid) in Minecraft

This Minecraft tutorial explains how to build a (3 layer pyramid) buoy construction with screenshots and footstep-by-step instructions.

In Minecraft, you can give players either Speed, Haste, Resistance, Jump Heave or Strength for fourteen seconds using a beacon in a iii-tier pyramid construction. Permit’s explore how to do this.


Subscribe

Required Materials

In Minecraft, these are the materials you can apply to make a 3 layer pyramid beacon structure:

TIP:
You don’t need to assemble all of the blocks. You need 83 of the mineral blocks and i beacon to build the structure. So you lot need 1 iron ingot, gilt ingot, diamond or emerald to activate the buoy.

Steps to make a Beacon Structure (3 layer pyramid)

1. Place 49 Blocks equally the Outset Layer of the Pyramid

Start, place 49 blocks of iron, gold, diamond or emerald in a 7×7 structure to create the first layer of the pyramid. In this tutorial, we will use 49 atomic number 26 blocks.

use beacon for 3 layer pyramid structure

TIP:
If you don’t take 49 of one blazon of block, no worries, y’all can mix and friction match. For example, yous could use 42 iron blocks and 7 gold blocks to build the 7×7 layer.

2. Identify 25 Blocks as the 2nd Layer of the Pyramid

Now, place 25 blocks of iron, gold, diamond or emerald in a 5×5 structure to create the 2d layer of the pyramid. In this tutorial, we will utilize 25 iron blocks.

use beacon for 3 layer pyramid structure

3. Place 9 Blocks as the Third Layer of the Pyramid

Adjacent, place ix blocks of iron, gilt, diamond or emerald in a 3×3 construction to create the 3rd layer of the pyramid. In this tutorial, we will apply 9 iron blocks.

use beacon for 3 layer pyramid structure

iv. Place a Beacon in the Center

Adjacent, place a buoy in the center of this construction.

use beacon for 3 layer pyramid structure

You should run across a vertical beam of low-cal appear that goes up into the sky (creates a light source that is light level 15).

5. Open up the Beacon Bill of fare

Next, open up the Buoy menu. You lot should come across 5 options for a 3 layer pyramid – Speed, Haste, Resistance, Spring Heave, or Strength.

use beacon for 3 layer pyramid structure

half dozen. Configure the Buoy

Add 1 emerald, diamond, gold ingot or atomic number 26 ingot into the empty box then choose a status result (either Speed, Haste, Resistance, Jump Boost or Strength). Nosotros volition select Forcefulness.

Click on the dark-green checkmark push when you lot are done configuring the beacon.

use beacon for 3 layer pyramid structure

7. Buoy will give Status Consequence

Now all nearby players will be given Force. The Force status effect will start at fourteen seconds, tick down and and then reset back to xiv seconds again. So players that stay inside the range of the buoy volition receive the Strength status effect continuously.

use beacon for 3 layer pyramid structure

Congratulations, you just learned how to utilise a beacon to build a 3-tier pyramid structure that gives all nearby players a status result (Speed, Haste, Resistance, Bound Boost or Strength) for 14 seconds in Minecraft!

Other Things to do with Beacons

Here are some other activities that you can exercise with beacons in Minecraft:

Other Intermediate Tutorials

Source: https://www.digminecraft.com/getting_started/beacon_pyramid_3_layer.php