How to install a washing machine

by -252 views

Although most washing machine vendors volition offer a cheap installation service, with the removal of your old machine, there are times when you may take to do the job yourself. Whether you’re moving house, take inherited a new automobile from a friend or just want to save a chip of cash, here’southward how to install a washing car.

If you have an old washing machine to remove, then follow my guide on how to disconnect a washing machine. Keep a spare towel to hand to mop upwardly any drips of water.

Aside from your hands, the aid of another person and some elbow grease, y’all may need a few tools to complete this job. We used:

  • An adaptable spanner
  • Flat head screwdrive
  • Washing machine water hose

Short version

  • Remove the transit bolts
  • Attach the water hose to the washing auto
  • Attach the water hose to the tap
  • Test the water connection
  • Plug in the washing auto
  • Connect the waste matter pipe
  • Level the washing machine
  1. Step


    Remove the transit bolts

    Once you’ve removed the washing machine from its packaging, including taking it off its polystyrene base, you’re ready to get started. Make sure that your washing machine is shut to where it has to go, but don’t button it into place yet.

    At the back of your new washing auto, yous’ll see up to five transit bolts. These secure the drum in identify when the automobile is transported and must be removed before y’all tin use your new machine.
    Some vendors provide a tool (this will be located inside the machine) for removing bolts, but others don’t, so you lot’ll need either an adaptable spanner or spanner set to hand. Using the tool or your spanner, undo the bolts at the rear.

    You’ll demand quite a lot of force to go started, and you’ll accept to continue turning them until the bolts become loose. Yous can then pull out the large plastic plug and cylinder. These tin can be tough to remove, only a flat-caput screwdriver can exist used for leverage to get them out.
    Manufacturers suggest that you keep the transport bolts in case you want to motility your washing machine once more, but they tin can exist difficult to get back in.

    Some washing machines come with stick-on pads that become underneath the washing motorcar, and help keep information technology quiet. If yours ships with these, yous’ll need to check the transmission to find out where they attach and how.

  2. Step


    Attach the h2o hose to the washing machine

    You lot tin reuse an old water hose if y’all have a washing machine already. If not, then it’s likely that your new machine volition take shipped with one, otherwise, you can pick upward a new hose from a DIY shop.

    All hoses are the same with screw connectors at either end. The angled connector is the one that should be screwed into the dorsum of your washing machine; this lets you push the car back to the wall without damaging the hose. The hose should be tightened by mitt.
    Install a washing machine add water hose to machine

  3. Pace


    Attach the h2o hose to the tap

    You’ll near likely need to feed the other cease of the hose through a hole in your kitchen cupboards in order to accomplish the cold water tap. Screw the straight end of the hose into this tap, again tightening by paw until it’south secure.

  4. Footstep


    Test the h2o connexion

    You can at present test the tap and your hose connection by turning the water on. About taps are blue (for cold water). When they’re vertically aligned, they’re off; when they’re in line with the water pipage, they’re on.
    Apply gentle pressure level to turn the tap on. You should hear a small-scale whoosh of h2o, as the hose is filled upwards. Check carefully that there are no leaks at either end of the hose. If there are, plough off the h2o, tighten the connections, then test again. You can leave the tap on.Washing machine tap

  5. Step


    Plug in the washing machine

    Now, y’all need to feed the power cablevision to where information technology needs to go. Once more, this often through a hole in a kitchen cupboard. Plug the cable in, and then turn on the power. You can press the power button on your washing machine to turn it on, making certain that it’s working. You can turn the washing machine off with its power button, only get out the main power socket on.

  6. Stride


    Connect the waste pipe

    The waste product pipage is permanently connected to the washing motorcar, and is ordinarily clipped in at the back. Unclip the hose and then feed information technology to where the drain is.

    If your washing machine has a hard plastic u-curve, you can prune this around the hose, and even adhere it to the wall. This helps prevent blockages in the piping, but it’s not essential; in fact, in many cases, if you use the u-bend, you might accept trouble getting the hose to reach where it needs to go.
    The best advice that we can requite is to brand sure that the waste pipe stays straight as you push the washing machine into place, avoiding whatsoever kinks in it.

    A lot of washing machines ship with a metallic collar that you put around the finish of the waste matter pipe first; cheaper machines often don’t have these.

    In both cases, push the end of the waste pipe over the hose connector near your sink. Push the waste matter hose firmly over this connector until it feels secure; a gentle tug is all you need to check. If you have a retaining collar, slide this effectually the top of the hose, and so use a flat head screwdriver to tighten it.
    Install a washing machine drain hose

  7. Step


    Level the washing machine

    Push the washing machine back into its place, but exit information technology sticking out plenty that you lot tin put a spirit level on the side and tiptop (facing forepart to back). Information technology’s usually easier to get 2 people to move a washing machine, pushing from the bottom of the automobile. As you lot push it dorsum, brand sure that neither of the hoses nor the power cable gets trapped. You may need to pull these items gently from under your sink to guide them through any holes cut in your cupboards.

    With the washing machine in identify, you should put a spirit level on both the superlative (facing front to back) and side. If the car is not level, it can vibrate and jump on the spin cycle, potentially causing impairment. To fix a washing machine that’s non level, you’ll need to adjust its front anxiety. These can be screwed in or out to arrange the washing machine; you may need to tilt the car back to make an adjustment.
    When the washing auto is level, push it back into place, now you tin start to use it.Install a washing machine foot level


What happens if my washing motorcar isn’t level?

An unbalanced machine will start to milkshake when information technology’s spinning clothes, which can lead to information technology jumping frontward, potentially causing harm.

Should I utilise PTFE tape for the hose?

PTFE tape is designed to stop leaks in piping connectors. Every bit the hose has a condom washer, yous don’t demand PTFE tape for this and can simply tighten by paw.

Yous might like…


Posted by: