How do you wrap your charging cables for storage or travel? In that location’southward a chance that you might be doing it wrong and causing impairment to the cable. Hither’s how to properly wrap your cables so that they last equally long as possible.


The Near Durable Micro USB Charging Cables For Any Situation

Ane of the virtually common methods for wrapping cables is to just tightly current of air them up around your manus, or around the power brick if one’due south fastened, but that tin can be pretty difficult on the cable. Instead, it’s better to wrap the cable in a more than gentle fashion, and here are some ways to practise that.

The “Roadie Wrap” Method

Perchance the best way to wrap any cable is to use the “Roadie Wrap” method, named subsequently the sound, video, and music industry where this type of cablevision wrap is used the nearly in guild to brand their expensive cables final as long as possible. You can utilise this same method for your charging cables, though.

This method basically just involves coiling your cables, but also alternating the direction of the loop with each coil. Once done, you can secure the cable from unraveling by using some handy velcro ties. The video below does a great job of visually explaining the Roadie Wrap.

The benefit of this is that you’re not creating any harsh bends in the cable, which would put stress on the wire and could somewhen make it tear or pause. Furthermore, the alternating loops allow you lot to chop-chop and easily uncoil the cable without creating any accidental knots or twists. This becomes especially beneficial if y’all use really long charging cables.


Stop Huddling by the Outlet: Longer Smartphone Cables Are Dirt Cheap

You could also but use the simple gyre method without alternate the direction of the loop. It works just as well to prevent damage to the cable and is a bit quicker and easier to perform, just y’all might end up with cumbersome twists that you’ll have to bargain with.

Cables with Attached Ability Bricks

If yous have a charging cablevision that has an fastened power brick that tin’t be removed and separated from the cable, that makes things a bit more difficult, just not all promise is lost.

You tin can still implement the Roadie Wrap, but in this case, outset at the end with the power brick and concur part of it in your paw as yous also grip a piddling bit of the cable, like then:

From there, start wrapping the cable using the Roadie Wrap like you would with any other cable. When finished, use a velcro necktie upward virtually the power brick to go on it all together. Yous could also apply a longer velcro tie to affix the power brick to the wound upward cable to prevent the brick from flopping all over, like then:

If you notwithstanding decide to stick with the quick and dirty method of just wrapping the cablevision around the power brick itself, it’s a good idea to go along the section where the cable connects to the ability brick gratuitous from bends. You can do this past giving that section a bit of slack earlier winding upwardly the residue of the cablevision.

In the end, don’t sweat it too much with your basic charging cables—they’re inexpensive to replace and most come with generous warranties anyway. With more than expensive cables (like the MacBook charger, which can be pricey), information technology’southward a expert idea to treat them with care then that they last for as long as possible.