Iphone 12 Not Finding Bluetooth Devices

iOS has been designed to focus on performance and reliability. Unfortunately, Bluetooth issues tin always evidence upwards after an upgrade due to device firmware compatibility issues of external accessories.

Several iPhone users have institute that their Bluetooth is not working after updating iOS. This is primarily impacting users that use third-party Bluetooth headsets or speakers with their iPhone.

In this article, we will expect at some of the symptoms and provide tips that have proven to piece of work in the by. Furthermore, we will also look at some of the favorite third-political party Bluetooth accessories and provide specific troubleshooting guidelines.

Related Reading:

  • Common iOS 12 Issues and How to Fix Them
  • Bluetooth Settings  Grayed Out on iDevice, What to do
  • Bluetooth Not Working, How to Ready your problems
  • Apple Picket Bluetooth Issues

Contents

  • Common Bluetooth Issues Afterwards Updating
  • Bluetooth non Working afterward iOS Update, How-To Fix
  • iPhone Bluetooth Not Working in Car, Tips to consider
  • Bluetooth Not Working with third Party Accessories
    • Bose Bluetooth Not connecting afterwards Update, Tips to consider
    • Amazon Alexa Bluetooth Issues with iOS


Common Bluetooth Issues After Updating

Delight note that the Bluetooth iCon has been removed in iOS. This is the familiar icon that used to be located at meridian of your screen in iOS 11 versions. This is not a issues but a feature modify as of iOS 12.

Almost of the symptoms reported center effectually the following issues:

  • After updating the iPhone to, the iPhone is unable to notice the third-political party Bluetooth device.
  • When connecting to the Bluetooth device, information technology merely spins forever while attempting to connect and doesn’t resolve.
  • A crackling voice on the speaker or headset of the Bluetooth device after updating iDevice.

We will highlight a few tips and tricks that have proven useful in the past when dealing with Bluetooth problems.

Before proceeding to troubleshoot, you may want to make certain that there are no interference conditions every bit highlighted in this Apple White paper that could be causing your Bluetooth problems.

If you face whatsoever of the Bluetooth problems mentioned above, try each of the following steps until the consequence resolves. For stubborn problems that won’t go away, you may demand to back up your iPhone or iPad and restore it using iTunes.


Bluetooth not Working later iOS

Update, How-To Fix


The best place to start troubleshooting Bluetooth issues is with your iPhone or iPad. Before proceeding further, test if you lot can connect the Bluetooth accompaniment with an iPad that’s on an older iOS version to encounter if it works.

You lot tin can likewise exam by connecting a friend’s iPhone to the Bluetooth accompaniment to see if it works. This will give you lot some ideas around whether the trouble is with the Bluetooth accompaniment, or if it localized to your device.

  • Quick Reset– The commencement and foremost thing to practise post-obit a successful installation an iOS update is to do a quick forced-restart of your device. On the older iPhones, y’all will do this by pressing the Home and on/off button together for ten seconds or so till you see the apple logo appear. Release the buttons when you come across the logo and let your iPhone startup. If you lot are using iPhone 7 or newer models, please check our iPhone reset guide for the steps.
  • Toggling Bluetooth mode– If yous are having issues with discovering your Bluetooth device on your iPhone, sometimes a simple toggle tin can do wonders.
    Tap on Settings > Bluetooth
    and plow off your Bluetooth. Next, Switch off your device and plow it back on followed by enabling the Bluetooth in the settings. Check and run into if your Bluetooth device now shows upwardly under ‘MY DEVICES’ in the Bluetooth settings. Please make sure to toggle the Bluetooth using the Settings app and not via the control center.
  • Reset Network Settings
    – Start past tapping on
    Settings > General > Reset
    and choose ‘Reset Network Settings.’ Please annotation that you may take to re-enter your Wi-fi name and credentials once the reset process is washed.
  • Pair and unpair the Bluetooth Device –
    If y’all tin see your Bluetooth device on the list under ‘MY DEVICES’ in settings, but you are experiencing connectivity issues, you can reset the Bluetooth device. Tap on the ‘i’ on the right-manus side of the row and cull ‘Forget This device.’ Switch off and restart your iPhone and so endeavour connecting once more to the Bluetooth device to see if it works for you.

1 tip that seems to be working for some users is to unpair the Bluetooth device by following the in a higher place stride and then reset all Network connections before attempting to pair the Bluetooth device again with the iPhone. Requite it a endeavour and see if that does the play a trick on for you.

If you are however having issues and have tried connecting your iPhone to other Bluetooth devices without any results, you may want to consider bankroll upward your device and performing a make clean restore of your iDevice.

iPhone Bluetooth Not Working in Machine, Tips to consider

If the Bluetooth issue primarily happens with connections to your automobile, yous can read Apple tree’s guidelines around how to deal with this result.

Apart from the guidelines from Apple in the article link, you can also check and see if your car has settings to add and delete devices to CarPlay. If you lot take the characteristic, you may want to remove your iPhone from your Car’due south retention and so re-add it dorsum to see if the issue gets resolved.

We removed the Bluetooth profile for the car from the iPhone Bluetooth settings ( Under
My devices), likewise equally removed the phone’s profile from the car’s Bluetooth. Restarted the iPhone and and so connected without the Contact sync characteristic of the auto’south Bluetooth. The outcome was resolved!

Ane important tip is when you lot are re-pairing your iPhone with your Car’s Bluetooth, skip the step when information technology comes to allowing contacts to be synced.


Quick Workaround for Machine Bluetooth Problems with iPhone

When we had Bluetooth issues, where it randomly would finish and and so re-connect, manually disabling and enabling Bluetooth settings on the iPhone did the trick, however, while connecting to the auto, the BT problems showed up again. What worked is to remove the iPhone from the machine’s Bluetooth settings, added it back once again and disable the contact sync feature of the car’s Bluetooth. We are hopeful that this effect has been fixed with the latest iOS Update.

Bluetooth Not Working with tertiary Party Accessories

JayBird Headphones Will Not Connect to iPhone Later on iOS UpdateJaybirds Not connecting to iPhone Bluetooth after iOS Update

If you are using a 3rd party Bluetooth accompaniment such as Jaybirds and are having trouble establishing the Bluetooth connection, you may not be lone.

Please follow the sequence of steps to assist pair the device

  1. Ability off the external headsets.
  2. Turn off Bluetooth in the iPhone settings.
  3. Plow Bluetooth back on in the iPhone settings.
  4. Concord the power button ON, on the Jaybirds, and Go on holding information technology on, even after the buds tell yous the status; “Power On, twenty% charged”…
  5. Within a few seconds, Your iPhone Bluetooth screen should “detect” the earbuds.
  6. You can release the Power Button on your Jaybirds.

The same steps should work for other models such as your JBL Flip. The key is to keep pressing the ON or the Start button until the iPhone discovers your device.


Bose Bluetooth Not connecting after Update, Tips to consider

If you have followed all the common resolution steps highlighted in the article and have not had success with connecting to your BOSE speakers, you may want to consider resetting the Bluetooth on your speaker.Bluetooth not working after iOS 12 Update, how-To Fix

First by turning off all the nearby Bluetooth devices in the range of your iPhone or iPad. (if that’s possible). Next, Printing and hold the ‘Mute’ push for 10 seconds on your BOSE device. This will disconnect your Bose mini speaker.

Restart the speaker and see if it works.

If that didn’t provide you with success, the side by side step while dealing with a Bluetooth BOSE device is to articulate the Bluetooth memory from the speaker.

To do so, you will need to press the Bluetooth push button for 10 seconds or so until you hear a tone. This clears upward all the Bluetooth devices from the speaker. You can try to re-pair and run into if it does the trick.


Amazon Alexa Bluetooth Issues with iOS

Bluetooth Not Working after iOS Update, How-To Fix

There are two types of supported Bluetooth profiles Alexa devices can apply:

  • Advanced Audio Distribution Contour (A2DP SNK) – Allows yous to stream audio from your mobile device to your Alexa device.
  • Audio/Video Remote Command Profile (AVRCP) – Allows yous to use hands-free voice control when a mobile device is connected to your Alexa device.

When facing connection issues with Alexa devices, your best bet is to clear all Bluetooth devices from memory and and so pair information technology dorsum again.

Every bit per Amazon’due south guidance, you tin clear the Bluetooth memory by following the steps beneath.

For Echo devices:

  1. Open up the Alexa app, go to the bill of fare, and select Alexa Devices.
  2. Select your device.
  3. Cull Bluetooth Devices.
  4. Select a device from the list, and then select Forget Device. Repeat this step for all other Bluetooth devices on the list.

For Repeat devices with a screen:

  1. Say, “Get to settings,” or swipe downwards from the height of the screen and select Settings.
  2. Select Bluetooth.
  3. Select the “info” icon adjacent to the device proper name, then select Forget Device. Repeat this step for all other Bluetooth devices in the list.

We hope that some of the tips in this article were helpful in fixing the Bluetooth issues that y’all were having following the iOS Update.

If you were unable to fix the problem, the adjacent matter to do before taking your device to Apple specialists is to perform a backup and clean restore of iOS. Sometimes when there is a persistent issue, a make clean restore of the device is the only mode to resolve the bug.

Source: https://appletoolbox.com/bluetooth-problems-with-ios-how-to-fix/