When your Oculus Quest 2 headset is not turning on, information technology tin can be due to a number of reasons. This can include an insufficient battery in which case you volition accept to accuse your headset before using it. In improver to that, in that location are unlike factors that can also come up into play when y’all are encountering this issue. In some cases, the problem can occur when your headset has undergone an unexpected state due to an improper shutdown and as a result, it won’t turn on. Regardless of the reason, in this commodity, we are going to show you how to resolve the problem in question and then simply follow through.
As it turns out, Oculus Quest headsets apace rose to fame due to the social media giant Meta behind information technology. While the headset works merely fine near of the time, there are sometimes cases where it throws up an fault such as the Can’t Reach Oculus Runtime Service message. However, when your headset is not turning on at all and you are faced with a black screen, information technology tin can exist quite troublesome.
That said, in that location are a number of workarounds that y’all tin utilise in society to get the event fixed and accept the headset boot up as it ordinarily would. Outset of all, make sure that you are holding down the Power push button for at to the lowest degree three seconds while trying to turn it on because a single tap does not boot upward the device. If it yet refuses to boot upward, yous may proceed with following the methods provided downwards beneath.
1. Perform a Hard Reboot
The starting time matter that we would recommend doing when you come beyond this issue is to perform a difficult reboot. Equally it turns out, in some cases, the device may not exist turning on properly due to a forced shutdown which could’ve rendered it to an unexpected state. In such a scenario, performing a hard reboot should fix the issue. Do not worry equally doing this will not reset your settings.
Performing a difficult reboot is rather simple. To do this, press and hold the
button for more than
30 seconds. You might demand to hold it for around 60 seconds even in some cases. Once yous see the
LED light turn white, you can let get of the power button equally this is the indication that the device has been hard rebooted. See if that fixes the problem for you.
2. Check your Charging Cablevision
It is possible that your Oculus Quest 2 may not be turning on because it does not have enough charge to boot up. These devices can drain the battery pretty quickly especially when you have been decorated in virtual reality for quite a while and lost track of time. As it turns out, nosotros would recommend leaving your Oculus Quest headset plugged in for some time to make sure that information technology has sufficient charge before using it once more.
When y’all are charging the device, practise look for the charging light indicator. It is also possible that even though you may take left the headset to charge just due to an issue with the charging cable or a loose connection, it may not accept charged at all. If in that location is no charging low-cal indicator even if you have plugged it in correctly, chances are that your charging cablevision may accept malfunctioned in which case you will have to try an alternating charging cablevision to encounter if that gets your headset to charge.
3. Try Booting into the Boot Carte
When your Oculus headset is not booting up as it normally would, there is an alternate method that you lot tin use to get it to boot up. This is used when y’all have to troubleshoot your device or for other purposes every bit it takes you to a boot menu instead of booting upwardly the device as it used to.
You can, notwithstanding, use this to your advantage and once the headset has booted into the boot menu, you lot can simply exit it and ask it to boot normally.
To do this, follow the instructions given downwardly beneath:
First of all, concord down the
button and the
button on your headset simultaneously for more than 20 seconds.
Once you practice that, the device should kicking into the boot menu. From in that location, yous can use the
to navigate to the “Exit and
Boot Device” selection then press the Power button to ostend the activeness. See if that gets y’all back in.
iv. Perform a Mill Reset
While performing a factory reset is never a favoured option, it is something that you might accept to do once in a while to become around an upshot. Every bit it turns out, when zip else seems to help, performing a factory reset can oftentimes resolve the result as it resets your headset settings dorsum to the mill defaults.
At that place are two ways using which you tin can perform a factory reset. If y’all have connected your telephone to your headset, you can use the Oculus app on your phone to perform a factory reset. Alternatively, you tin also use the transmission approach and factory reset the device from the kicking menu. To exercise this, follow the instructions given downwardly below:
Outset of all, you will take to boot into the kick menu. To do this, press and concord the
buttons on your headset until you see the boot menu appear.
On the Kicking Menu, use the
to navigate through the options and choose the
button to confirm your selection. Confirm your activeness on any follow-up dialogs. With that done, your headset volition now be restored to its factory defaults.
- After that, run across if the headset powers on at present.