Red Dot On Oculus Quest 2

Oculus Quest And Quest 2: Tape And Ameliorate Video Capture Quality

To tape VR gameplays on Oculus Quest and Quest 2 is very piece of cake but the end upshot is far from reaching the quality standards. That’south why, we’ll show you how to go the most out of your virtual reality headset in order to go the best quality for your videos.

Capturing VR game gameplays and sharing them on social networks or YouTube has become something particularly common today.

In that location are currently several methods for capturing your own game videos. Information technology is quite possible to record the VR headset gameplay via

oculus.com/casting
,

AirReceiver

etc.

However, in this tutorial, nosotros will focus exclusively on the gameplay captured directly from an Oculus Quest and an Oculus Quest 2.

“Brand YouTube Quality VR Videos From Your Quest”



A MUST Read: Meridian 25 Best Oculus Quest Multiplayer VR games – Co-op, Team VR Games


How To Record Your Games With An Oculus Quest?


To start a recording on Oculus Quest and Quest two, simply go to the
“Sharing”
menu at the bottom correct and select
“Tape a video”.

To indicate that the recording is in progress, a
ruddy dot
at the acme of the screen appears. If this indicator bothers y’all, know that it is possible to remove information technology.

To make it disappear, the option is in
“Settings”
then
“Device”. In this menu,
just turn off “Video Capture Indicator”
and you’re proficient to go.

Where Are Your Recorded Videos? And Features Of Original Videos

By default, the files are in the format 1024 x 1024 in 30 fps with a bitrate of 5 Mbit/s. Values ​​that are naturally plant on the Oculus site:

Features Of Original Videos

While the foursquare ratio can be useful on social media, information technology probably won’t work for some YouTube channels.

Fortunately for the supporters of the 16/9 ratios, these original values ​​can be modified in order to obtain dainty videos in 1920 10 1080 format and up to 60 fps for those who want information technology.


Suggested:

Oculus Air Link: How To Play PCVR Games on Quest two WIRELESSLY

Oculus Quest: How To Change The Video Recording Quality?

To be authorized to modify the original settings of your Oculus Quest or Quest two, you must switch your virtual reality headset to developer mode and download the SideQuest application.

If you’re not familiar with
side loading
 and
side quest
 and want to Sideload Sidequest games and apps for yourself, it’s effortless to get it all prepare.

So I’ve linked a couple of tutorials on
how to start sideloading.
 Information technology takes maybe five to ten minutes max to become it all set up to get.

Footstep i: Change The Resolution Of The Videos:

Now that your VR headset is connected to your PC,
make sure that it is likewise recognized by SideQuest (green indicator on the left).

Yous must then become to the
“Device settings & tools”
carte du jour located at the top right of the awarding:

ModifyModify The Resolution Of The Videos:

This opens up a host of options of all kinds. In this listing, nosotros volition focus on just two of them. The first is
“Set Video Capture Size”.

This choice will allow you lot to change the foursquare format of the original video capture.

Set Video Capture Size

You lot will thus be able to choose between three aspects by simply clicking on it; 480p, 720p or
1080p, which is what we recommend.

A bulletin will announced on a green banner to let yous know that the alter has been taken into account.


Suggested:

How to Use SideQuest WIRELESSLY On Oculus Quest i & 2 – (WIN & MAC)

Stride ii: Increase Frame Rate

This stride is just necessary if yous want to deliver polish videos with 60fps.

If and so, y’all are going to need the
“Full Rate Capture”
option. Past clicking on
“ON”, the video recording frequency can then increase to achieve 90 fps.

There are, however, ii conditions for achieving such frequency. The start is of grade to be in possession of an

Oculus Quest 2

and the second is to accept an
optimized application or game
capable
of running at 90 Hz.

Otherwise, as with the first Oculus Quest, the capture will not exceed 72 fps.


Only whether the issue is 90 or 72 fps is really too little importance. Indeed, once exported to your social networks, the video volition ultimately be shared in 60 fps.

On the other mitt, it is important to emphasize that once the full rate capture is activated, display issues can occur.

On the Oculus Home, for case, slowdowns will appear, simply the capture is not affected.

In most cases, this problem disappears completely later launching an awarding. However, some tracks similar Beat Saber retain them and can greatly hinder the experience.

Pace 3: Meliorate The Capture Quality By Changing The Bitrate:

With videos now in 1080p, the flaws related to compression will now be much more noticeable in the images.

This is normal since the data rate set at v Mbit/south no longer really corresponds to the new definition.

The adjacent and last step consists of increasing the bitrate, which will accept the consequence of significantly changing the quality of the videos.

To do this, select the
“Run ADB commands”
in the Sidequest card this time, and so click on
“ENABLE USB ADB”:

ENABLE USB ADB

The bill of fare that has merely appeared should be used with circumspection because it allows you to change all of the original settings of an Oculus Quest.

Thus, to increase the bit rate of the video capture, we volition have to use and change the
“debug.oculus.capture.bitrate”
command visible in particular in the tabular array on the Oculus site mentioned previously:

Features Of Original Videos

The default recording value is
“5000000”
which corresponds as we accept seen to 5 Mbit/s. Of course, the larger the number, the greater the catamenia will exist.

But if at
xxx,000,000
the image will undoubtedly remain sharper, the recording volition all the same be unstable and gamble causing the Oculus Quest to crash. Moreover, a higher bitrate also means videos that volition take upwards more space in your device.

On this indicate, information technology is also very important to know that files
shut to and over iv GB will be corrupted and cannot exist used.

This is actually due to a limitation of the

FAT32

format that the VR headset depends on. As a consequence of this, you are going to accept to limit your recordings past trying not to border on 4 GB.
Usually, you get close to it from 18 – 20 minutes of capture.

Let’s come back to change the Bitrate of our video, what we noticed after several tests were that “twenty,000,000”, or 20 Mbit/s, was a good compromise between performance and quality.


To obtain this new bitrate speed, insert the following command as shown in the paradigm opposite:
adb beat setprop debug.oculus.capture.bitrate 20000000
and click on
“RUN COMMAND”.

The message
“Command Completed”
volition appear to confirm that information technology has been taken into account.

Once the iii deportment have been performed, you can freely disconnect your virtual reality headset and apply it usually.

The registration process remains of course the same. You can revert to factory settings at whatever time by merely
restarting your Oculus Quest.


Suggested:

2 Methods – How To Play Skyrim VR On Oculus Quest 1 & 2

How You Will Record Your Voice?

Add to this that the speed is only 64 Kbit/s. Despite multiple community requests for stereo, Oculus is turning a deaf ear for the moment.


On the other hand, you will undoubtedly have noticed that it is incommunicable to record your voice from your VR headset.

On this point, you will accept no other choice simply to orient yourself towards an alternative solution to recover your voice individually.

For this, there are several

wireless lavalier microphones

such as the

Rode Wireless Go

to which you tin can add the

Rode SmartLav microphone

to better the sound.

Finally, to cease, all y’all have to do is put everything together in video editing software.


Read Side by side:

How to Play Steam VR Games on Oculus Quest Wirelessly Using Virtual Desktop

So that’s how yous tin Tape/Capture and Improve the Quality of your YouTube VR or other Social Media videos on your Oculus Quest 1 & 2.

So What did you think of this article? Do not forget to leave your comment.

Finally, if y’all are interested in the world of Virtual Reality, take a look at our other articles and go to our

YouTube Channel

and stay tuned for futurity tutorials


Suggested:

GTA v VR – How To Play GTA 5 In VR Officially On Oculus Quest 1 & 2

Source: https://www.vrmarvelites.com/how-to-improve-and-record-videos-on-oculus-quest-1-2/