Samsung Tv Remote Battery Cover Replacement


Download Article


Download Commodity

There are many different reasons why your Samsung remote no longer works ranging from a dirty receiver to a dead bombardment. This wikiHow will teach you how to repair a Samsung remote using a few unlike methods.

Steps

  1. 1

    Remove the batteries and concur whatever button for 20 seconds.
    This action will clear (or attempt to articulate) whatever electronic glitches that may be preventing your remote from working.

  2. 2

    Reinsert the batteries.
    If your remote works now, you’ll know it was an electrical glitch and may need to repeat this process later.

    • If your remote still does non work, keep to the next step.

    Advertisement

  3. 3

    Replace the batteries.
    This is the most mutual issue with remotes and the easiest to gear up. Simply replace the existing batteries with new ones. Make sure yous’re replacing the right size (AA vs AAA) and positioning them correctly (the inside of the battery slot should tell you which side is negative and which side is positive).

    • If your remote still does not work, continue to the next step.
  4. four

    Clean the transmission window.
    If replacing the batteries did not piece of work, attempt cleaning the upper edge of your remote. This is where the information leaves your remote to transmit to the TV, so if you have a remote with an LED transmission low-cal, make sure that window is clean so the data is free to get out your remote.

    • If you have a Bluetooth remote, you lot can ignore this footstep.
  5. 5

    Test the remote sensor with a camera.
    To do this, aim your photographic camera at your remote and outset recording. The goal is to run across an Infrared heart on the remote flashing on the LCD screen of your camera when you press a button on the remote. If you do, the remote is sending a signal and is working; notwithstanding, your TV’s receiving sensor might be blocked or muddied.

    • If you don’t see the low-cal and tried the previous fixes (yous’ve discharged any electronic glitches, replaced the batteries, and cleaned the transmission window), you might have a lacking remote.
  6. 6

    Pair your remote with your TV once more (Smart Remotes but).
    Since Smart Remotes are Bluetooth compatible and Bluetooth has a hazard of resetting, you’ll want to try re-pairing your remote with your Goggle box before y’all purchase another remote.

    • Press two buttons (usually the Back and Play buttons) on your remote for nearly three seconds while pointing it at the IR sensor on your Idiot box. The buttons for pairing change according to which remote y’all have, then yous might need to refer to the user transmission for that model remote. If you accept the 2013 Smart Remote, you’ll observe the pairing push located nether the battery embrace.[ane]
  7. 7

    Reset your remote to factory settings (Smart Remotes only).
    Samsung remotes from 2016 and newer take the ability to be reset to factory settings by pressing and holding the
    Back
    and the button to the right of the
    123
    button. You lot tin find which buttons yous demand to press in the user manual.

  8. eight

    Test the TV with another remote.
    You lot can try using another remote that yous know works to see if the TV has an event. If the other remote works, you know the consequence is with your remote and y’all might demand a new i. If the other remote does not piece of work, your TV’s sensor might be blocked or dirty (does not utilise to Bluetooth remotes).[2]

  9. Advertisement

Ask a Question

200 characters left

Include your email address to get a bulletin when this question is answered.

Submit





Advertisement

  • Some other issue is dirty battery terminals, but you may not want to mess with them. If you observe a lot of corrosion on the battery terminals, you can either make clean information technology or buy a new remote.

    • If you lot decide to make clean the corrosion, annotation that battery acid is very harsh and you lot need to protect yourself first.

    <b>Thanks! We’re glad this was helpful.</b><br />Looking for more fun means to learn on wikiHow?<br />Acquire most yourself with <a href=’/Quizzes’><b>Quizzes</b></a> or effort our brand new <a href=’/Games/Train-Your-Brain’><b>Train Your Brain</b></a> give-and-take game.

Thanks for submitting a tip for review!

Advert

Most This Article

Article Summary
X

1. Remove the batteries and hold any button for 20 seconds.

2. Reinsert the batteries.

3. Supervene upon the batteries.

iv. Clean the transmission window.

five. Exam the remote sensor with a photographic camera.

6. Test the TV with another remote.

Did this summary assistance you?

Thanks to all authors for creating a folio that has been read 11,913 times.

Is this commodity up to date?

Source: https://www.wikihow.com/Repair-a-Samsung-Remote