stats online users

Setup Google Wifi After Factory Reset

by -248 views

Mill reset Google Nest Wifi or Google Wifi devices

If you lot factory reset your Google Nest Wifi or Google Wifi devices, it’ll erase all current settings and data. Deleted data is gone forever. After you mill reset a device, you’ll take to set upward your router and point(s) once again.

Of import:
If you lot use the Google Wifi app to manage your devices and mill reset your router or points, yous’ll need to use the Google Home app when you set them up again. Learn more almost changes to the Google Wifi app.

Yous might perform a factory reset when you want to:

  • Give your router or signal to someone else
  • Render the device
  • Erase all information from your router or signal
  • Commencement fresh and gear up upwardly your router or point(southward) from scratch

Note:
A mill reset can take several minutes and will interrupt your internet access. Afterwards reset, you’ll demand to set up your devices again.

Ways to factory reset your device

You can factory reset your device with the:
Google Home app Google Wifi app Manufactory reset button on your device
Uniform devices Devices set upwardly in the Google Home app Devices set up in the Google Wifi app Any Wifi device
When to use this method Recommended: Apply the app factory reset whenever possible. Your devices aren’t accessible in the app.
Results
  • Your router or point(s) will render to the factory default.
  • Information from your router or Wifi point(s) and the Google Home or Google Wifi apps, including current settings and whatever information used for Deject services, will be erased.
  • Your router or point(s) will as well be removed from your Google Business relationship immediately.
  • Your router or signal(s) will return to the manufacturing plant default.
  • This will delete information from your router or point(south), only not your app or cloud.
  • Your device and network volition yet appear in the app.
  • Later on 6 months, Google will automatically delete the app data and cloud data. The next time y’all plug in your device, you’ll accept to perform the setup process again.
    • Annotation: Data deletion also happens afterwards your device is powered off or disconnected from the internet for 6 months.

Why did my device factory reset itself?

If your Google Wifi or Nest Wifi device is powered off or asunder from the internet for half dozen months, it’ll factory reset itself the next time it connects to the internet, and Google will automatically delete the app data and cloud data.

Mill reset your devices with the Google Habitation app

Factory reset your router and all points

Factory reset your point

Manufactory reset your devices with the Google Wifi app

Factory reset your primary indicate and all other points

If yous reset your Google Wifi points from the Wifi app, it’ll delete all settings and data from your Wifi points, Cloud services, and the Google Wifi app. It’ll besides remove your Wifi point(due south) from your Google Business relationship and network from the Google Wifi app.

Of import:
If you employ the Google Wifi app to manage your devices and manufactory reset your router or points, you’ll need to employ the Google Domicile app when yous set up them up again. Learn more than nigh changes to the Google Wifi app.

If you’ve migrated your Google Wifi network to the Google Home app, follow the Google Domicile app instructions instead:

  1. Open the Google Wifi app
    .
  2. Tap the Settings and actions tab


    Network & general.
  3. Nether “Network,” tap
    Wifi bespeak(s).
  4. Tap
    Mill Reset. On the next screen, tap
    Manufactory Reset
    to ostend.
  5. The Wifi point(s) will wink blue, then plough solid blueish. This process can have upwardly to 10 minutes. You won’t be able to add together your Wifi point(s) to a new network until the reset is complete.
  6. Once complete, the app will show “Reset is complete,” and your Google Wifi point(s) volition slowly pulse blue to indicate it’due south ready for setup.
  7. To set up your point(s) again, follow the steps to ready upwardly Google Wifi in the Google Home app.

Factory reset a single Wifi signal

Factory reset your router or point with the factory reset button on your device

Nest Wifi router
Google Nest Wifi router

The factory reset button is located on the lesser of the router. Cheque for a circle etched into the bottom then follow the instructions below:

  1. Press and hold the mill reset button for 10 seconds. The light will flash yellow, and so turn solid yellow. When the light is solid yellow, release the button.
  2. The reset process will beginning, which can take upward to 10 minutes. Don’t unplug the ability cord during this procedure.
  3. When factory reset is complete, the light on your router volition pulse white.
  4. Subsequently the device has been reset, the device will nevertheless appear in the Google Home app. To remove the device, follow the instructions for app factory reset. To gear up once more, you’ll need to create a new network, then readd any points again.

Annotation: If you hold the button for likewise long (>fifteen seconds), the device will showtime flashing xanthous and won’t factory reset. In this case, unplug the ability cord from the device, go out it unplugged for 1 infinitesimal, so plug the power cord back in and try again.

The hardware push mill reset volition delete all current settings and data from your device. However, all data Google has nerveless and analyzed for Cloud services will remain. Later 6 months, Google volition automatically delete this Cloud data. You lot can e’er remove this data by performing a mill reset from the Google Home app, fifty-fifty on the offline network.

Nest Wifi point
Google Nest Wifi point

The factory reset push button is located on the bottom of the point. Check for a circumvolve etched into the bottom, then follow the instructions below:

  1. Printing and agree the factory reset push on your point.
  2. After about 5 seconds, your device volition brainstorm the factory reset procedure. Go on to hold the push for most 10 seconds, until there’southward a sound confirming the device is resetting.
  3. Afterwards the device has been reset, the device will even so appear in the Google Home app. To remove the device and your previous network, follow the instructions for app factory reset.

The hardware push button mill reset will delete all current settings and data from your device. Withal, all data Google has collected and analyzed for Deject services will remain. After 6 months, Google will automatically delete this Cloud information. You can always remove this data by performing a factory reset from the Google Habitation app.

Google Wifi point
Google Wifi point

Important:
If you utilize the Google Wifi app to manage your devices and factory reset your router or points, yous’ll need to use the Google Home app when you set them upwards once more. Learn more than virtually changes to the Google Wifi app.

The factory reset button is a circle etched into either the lesser or back of the device.

  1. Press and hold the factory reset push for ten seconds. The light will flash orange, so plough solid blue. When the light is solid blue, release the button.
  2. The reset process will beginning, which can have upwardly to x minutes. Don’t unplug the power cord during this procedure.
  3. When the factory reset is complete, the lite volition change from solid blue to pulsing blueish to indicate it’south ready for setup.
  4. After the device has been reset, the device will still announced in the Google Abode or Google Wifi app. To remove the device and your previous network, follow the instructions for app mill reset.

If the firmware on your Google Wifi point is

earlier than 13729.57.27:

  1. Unplug your point from the ability source.
  2. Printing, and then hold the mill reset button on the device. While holding down the button, plug the power cable back in. Keep pressing the push for about 10 seconds. Your indicate will wink white, and then blue. When it flashes blue, you can release the push.
  3. The point will continue flashing blue for about 45 seconds, then turn solid bluish. This process tin have up to ten minutes.
  4. Look upwards to x minutes for the device to fully reset.
  5. Once complete, your bespeak will pulse blue to betoken it’s ready for setup.
  6. After the device has been reset, the device volition still announced in the Google Home or Google Wifi app. To remove the device and your previous network, follow the instructions for app manufacturing plant reset.
  7. If you take reset your main point (router), you’ll demand to set a new network and add any points again using the Google Home app.

Note: If you hold the push for too long (>xv seconds), the device will start flashing orangish and won’t mill reset. In this case, unplug and endeavor over again.

The hardware push button manufacturing plant reset volition delete all current settings and information from your device. Nevertheless, all information Google has collected and analyzed for Cloud services will remain. After 6 months, Google will automatically delete this Cloud data. You can e’er remove this data past performing a factory reset from the Google Dwelling house or Google Wifi app.

OnHub device
OnHub

  1. Unplug your OnHub from the power source.
  2. Detect the factory reset button.
    • OnHub from TP-Link:
      Twist the outer beat counterclockwise, then lift. The factory reset button is located in a higher place the power port.
    • OnHub from ASUS:
      The factory reset button is located above the USB port on the dorsum of the device.
  3. Utilise the end of a paper clip to printing, so hold the factory reset button. While property downward the push, plug the ability cable dorsum in. Continue to press the factory reset button for well-nigh ten seconds.
  4. The reset process will start, which tin accept up to 10 minutes. During this process, don’t remove the OnHub from the power source.
  5. When consummate, your OnHub will pulse bluish.
  6. Afterwards the device has been reset, the device will nonetheless appear in the Google Home app or Google Wifi app. To remove the device and your previous network, follow the instructions for app manufactory reset.
  7. To set upwards your OnHub again, follow the steps to ready your device in the Google Home app.

Notation:
If you agree the button for too long (>15 seconds), the device will beginning flashing red and won’t factory reset. In this example, unplug and endeavor once again.

Related articles

Set up Google Nest Wifi
Set upward Google Wifi
Restart Google Nest or Google Wifi devices
What the low-cal on your Wifi device means

Was this helpful?

How can we improve it?

Source: https://support.google.com/googlenest/answer/6246619?hl=en