stats online users

Solid Blue Light On Google Wifi

by -306 views

What the light on your Wifi device means

The low-cal from your Google Nest Wifi or Google Wifi device shows the status of your device. Different colours and pulses will bespeak how your device is performing.
Notation: Low-cal colours are dissimilar for the Google Nest Wifi router, Google Nest Wifi points and Google Wifi points.

Google Nest Wifi router

Colour What it means What to do

No light

Router has no power or the light was dimmed in the app.

Check that the power cable is properly connected to your router and to a working ability socket.

If your device is already set and the light appears off, check your lite brightness settings in the app.

If there’southward still no light, contact customer support.

 Solid white, no light,  solid white

Device is booting upward

Expect for the device to boot upward. This takes well-nigh a minute. When information technology’s done, it will slowly pulse white, letting you know that information technology’s set up for setup.

Image Slow-pulsing white  Slowly pulsing white Device is fix for set upwards

Use the Google Dwelling app to fix your router.

Image Solid white light Solid white Router is online and all is well. Y’all’re online. Savour!
Image Slow-pulsing yellow  Pulsing yellow There is a network fault.

Check that the Ethernet cable is connected to both your router and your modem and that both devices are turned on. You might need to unplug and plug in each device again. Larn more most fixing network errors.

Image Fast-blinking yellow  Fast blinking yellow

You are holding downwards the reset push and are factory resetting this device.

If you lot go along holding down the reset button, after virtually 12 seconds, the light volition turn solid yellow. One time information technology is solid yellow, let get of the mill reset button.

Image Solid yellow light Solid yellowish Router is factory resetting. This can take up to 10 minutes. When it’s done, the device will reset itself and start pulsing white, letting you know that information technology’s ready for setup.
Image Solid red light Solid crimson Something is wrong Critical failure. Factory reset the router. If the low-cal stays ruddy, contact customer support.

Google Nest Wifi point

The low-cal band on the bottom of the point shows various statuses.

Note: The ii white LEDs on the top of the bespeak indicates volume command and helps you know where to impact to command book. These will appear when music is playing and your mitt gets shut or when yous touch the volume controls.

Colour What it ways What to do

No lite

Note: When Nest Wifi points are set up, lights will only appear when you’re interacting with the device.

Nest Wifi point has no ability.

or

The low-cal was dimmed in the app.

  1. Cheque that the power cable is properly connected to your point and a working ability socket.
  2. Try the voice command “Ok Google”. if the bottom lights up when you lot speak to the indicate or tap the volume controls, it’south working properly.
  3. If your point is already set up and the light appears off, check your light brightness settings in the app. The bottom lite could be dimmed or the mute light might be turned off, but your device is working properly.

If in that location’s all the same no light, contact customer support.

Image Orange ring Solid orange The microphone is muted and turned off.

On the back of the signal, move the switch to turn it back on.

Notation: Turning off the microphone prevents the signal from listening or responding. To collaborate past voice with your point, the microphone must exist on.

Image Fast-pulsing yellow ring Fast pulsing yellow You’re about to factory reset the device.

Continue belongings the factory reset button to reset the device, or let go to end.

Image Yellow ring Solid yellow The device is resetting. Wait for the device to reset itself. It may take several minutes. When it’s ready for fix upward, the device will slowly pulse white.
Image Slow-pulsing yellow ring Slowly pulsing yellowish At that place is a network error.

Check the connections between your modem and your router or primary Wifi indicate. Yous might need to unplug and plug in each device again.

If your network is working, but a particular point isn’t. Effort restarting your point in the Abode app. If that doesn’t prepare the consequence, manufacturing plant reset your point and set it up again.

Learn more nigh fixing network errors.

Image Slow-pulsing white ring Slowly pulsing white

Device is booting up or is fix for ready

Use the Google Home app to complete gear up.

Image Fast-pulsing white  Fast pulsing white

Image Fast-pulsing white  Fast pulsing white

Google Assistant is listening, thinking or responding.

or


You or someone in your home has anotification or reminder.

Once your device is set up, the light volition pulse white when interacting with your Google Assistant. This is working properly.

The low-cal will likewise pulse white when you accept a notification or reminder. This will last for 10 minutes or until the person for which the reminder was assigned asks “Ok Google, what are my reminders”?

Image Fast-flashing white  Flashing white Someone in your home is receiving a notification or reminder. Ask “Ok Google, what are my reminders”?
Image Pulsing blue ring Pulsing blue Y’all are receiving a telephone call. Tap the top of the point or say “Ok Google, answer the phone call”.
Image Red ring Solid cherry-red Point has an effect. Factory reset the signal. If the light stays scarlet, contact customer support.

Google Wifi point, OnHub

Color What it ways What to do
No light Wifi signal has no power or the light was turned off in the app.

Cheque that the power cable is properly connected to your Wifi point and a working ability socket.

If your Wifi bespeak is already fix and the light is off, check your low-cal effulgence settings in the app.

If in that location’due south still no lite, contact customer support.

Image Solid white light Solid white Wifi bespeak is online and all is well.

You’re online. Bask!

Note:
For OnHub, this light will be teal.

 Pulsing blue

Wifi betoken is ready for setup.

Fix the Wifi point in app. The calorie-free volition plough solid white once the Wifi point is online.

 Solid blue Wifi bespeak is factory resetting itself. This can take upwardly to 10 minutes. When information technology’south done, the Wifi point will reset itself and offset pulsing blue, letting you know it’south set for setup.
 Pulsing orange Wifi point has no Internet connection. Bank check that the Ethernet cable is properly connected to your primary Wifi point and modem. Learn more about fixing network errors.
 Pulsing red Wifi point has an result. Factory reset the Wifi bespeak. If it continues to pulse red, contact customer support.

Related manufactures

  • Google Nest Wifi set up
  • Google Wifi set up
  • Google Nest Wifi or Google Wifi device isn’t found during setup
  • Wifi router or bespeak is offline
  • Factory reset Google Nest Wifi or Google Wifi

Was this helpful?

How tin can we improve it?

Source: https://support.google.com/googlenest/answer/6191584?hl=en-GB